Cost to Build · SW Calgary
Inner-city southwest neighbourhood with 50 ft lots, walkability to 17 Ave SW, and steady infill turnover.
Typical Lot
50 ft × 120 ft
Lot Price
$460,000 – $620,000
Build Cost / sqft
$260 – $320
Typical Build Size
2,400 – 3,000 sqft, 2-storey + finished basement
Common Zoning
R-C2 (semi-detached & duplex infill permitted on most lots)
Permit Lead Time
4–6 months
Killarney is one of Calgary's most actively redeveloping inner-city southwest neighbourhoods — close enough to 17 Ave SW and Marda Loop for cafés and groceries on foot, close enough to downtown for an under-15-minute commute, and large enough on lot to support meaningful infill. Buyer demand for new construction here skews toward design-driven semi-detached pairs and three-storey single-family builds with rooftop patios. The 1950s bungalow stock is at the tail end of its economic life, so teardown-and-rebuild is the dominant pattern.
Killarney lots are typically narrower at street frontage and slope slightly toward the back. Many corner lots in the area are excellent candidates for two-unit infill with separate street addresses, which improves resale. Watch for hidden underground oil tanks and old gas lines during demolition planning — they are not uncommon on 1950s lots. The area's tree canopy is mature and protected.
Side-by-side semi-detached infill, modern single-family custom builds with legal basement suites. Most projects in Killarney fall into the 2,400 – 3,000 sqft, 2-storey + finished basement range, and Inner-city families wanting walkability without a downtown condo footprint; investors building for the inner-city resale market.
A realistic 2026 budget for a custom build in Killarney, assuming a 2,400 – 3,000 sqft, 2-storey + finished basement mid-range custom home:
| Cost Component | Typical Range |
|---|---|
| Land (typical 50 ft × 120 ft lot) | $460,000 – $620,000 |
| Demolition & site prep | $20,000 – $50,000 |
| Construction (2,400 – 3,000 sqft, 2-storey + finished basement) | $600,000 – $820,000 |
| Design, engineering & permits | $40,000 – $80,000 |
| Total project (land + construction + soft costs) | $1,120,000 – $1,520,000 |
Ranges reflect 2026 inner-city Calgary infill costs at $260–$320/sqft for mid-range custom finishes. Higher-end finishes, complex sites, or legal basement suite inclusion push toward the top of each range.
A luxurious semi-detached infill in Killarney with a legal basement suite — 4 bed, 4 bath, 2,103 sqft + 943 sqft suite. Now sold.
See this project →
A luxurious semi-detached infill in Killarney with a legal basement suite — 4 bed, 4 bath, 2,101 sqft + 937 sqft suite. Now sold.
See this project →Cost to build in Killarney ultimately comes down to lot specifics (orientation, slope, existing structures), finish level, and whether you are building for resale or owner-occupation. We can usually give a meaningful ballpark within 48 hours of receiving a lot address — and we will tell you up front if a lot looks marginal for your goals.
Free Estimate
Our calculator runs the math live for any lot size and finish level. No signup needed.
Calculate My Estimate →Or call (587) 896-0200
Compare Nearby